Upgrading to AtomOS 11.12.00

New Features

Dropbox and Dropbox Replay

• Dropbox and Dropbox Replay are now supported as direct camera-to-cloud targets

For more information, please refer to the Release Notes for AtomOS 11.12.00.

Firmware Update Procedure:

Atomos recommends that your Shogun Connect is plugged into mains power before commencing the firmware update.

1. Insert a compatible, formatted SSD into the Docking Station.
2. Unzip the downloaded file and copy the ATOMSGC.FW file to the root directory of the SSD.
3. Eject the SSD according to operating system guidelines.
4. Insert the SSD into the Shogun Connect.
5. Power on the Shogun Connect and the firmware update process will begin automatically.
   Note: If your Shogun Connect is already powered on, you will be prompted to perform the firmware update when a drive containing new firmware is inserted.
6. Once the update is complete, your Shogun Connect will power itself down.
7. Power your Shogun Connect back on and the device will automatically complete the update process.
8. To verify if the firmware update was successfully completed, navigate to the main menu and scroll to the info tab.

For further information and troubleshooting, click here.

Important Note: This update is only relevant for users of devices from a certain production batch. It addresses an issue that resulted in crushed white levels. If the serial number of your device starts with K11, please install this 10.43.3B release. If your Shogun 7’s serial number doesn’t start with K11, please install the regular 10.43 firmware instead.

Firmware Update Procedure: Please ensure the unit is plugged into mains power before commencing the firmware update.

Upgrading to AtomOS 11.12.00

New Features

Dropbox and Dropbox Replay

• Dropbox and Dropbox Replay are now supported as direct camera-to-cloud targets

For more information, please refer to the Release Notes for AtomOS 11.12.00.

Firmware Update Procedure:

Atomos recommends that your Shogun is plugged into mains power before commencing the firmware update.

1. Insert a compatible, formatted SSD into the Docking Station.
2. Unzip the downloaded file and copy the ATOMSGN.FW file to the root directory of the SSD.
3. Eject the SSD according to operating system guidelines.
4. Insert the SSD into the Shogun.
5. Power on the Shogun and the firmware update process will begin automatically.
   Note: If your Shogun is already powered on, you will be prompted to perform the firmware update when a drive containing new firmware is inserted.
6. Once the update is complete, your Shogun will power itself down.
7. Power your Shogun back on and the device will automatically complete the update process.
8. To verify if the firmware update was successfully completed, navigate to the main menu and scroll to the info tab.

For further information and troubleshooting, click here.