June 2nd 2023

AtomOS 10.92.00 Firmware Release Notes

SHOGUN CONNECT

Important Note:

In order to record RAW from either the Panasonic S5II/S5IIX or the FujiFilm X-S20, ProRes RAW needs to be activated via the My Atomos portal.

For an in-depth walkthrough of the feature activation process, please visit our FAQs: https://atomos.zendesk.com/hc/en-us/articles/4514756643983-My-Atomos-Feature- Activation-Guide

Installation Instructions:

ATOMOS recommends that your SHOGUN CONNECT is plugged into mains power before commencing the firmware update.

1. Insert a compatible, formatted SSD into the Docking Station.
2. Unzip the downloaded file and copy the ATOMSGC.FW file to the root of the SSD.
3. Eject the SSD (according to operating system guidelines).
4. Insert the SSD into the SHOGUN CONNECT.
5. Power on the SHOGUN CONNECT and the firmware update process will begin automatically.
6. If your SHOGUN CONNECT is already powered on, you will be prompted to perform the firmware update when a drive containing new firmware is inserted.
7. Once the update is complete, your SHOGUN CONNECT will power itself down.
8. Power your SHOGUN CONNECT back on.
9. To verify if the firmware update was successfully completed, navigate to the main menu and scroll to the info tab.

Note: Once firmware 10.92.00 is successfully installed on the SHOGUN CONNECT, the unit may reboot to update its hardware modules. Do not interrupt the firmware installation process.

New Features:

Panasonic S5II RAW Support

ProRes RAW Recording Specification via HDMI

• 5.9K – 16:9 (5888 x 3312) at 23.98p, 25p, 29.97p
• 4.1K – 17:9 (4128 x 2176) at 23.98p, 25p, 29.97p, 50p, 59.94p
• 3.5K – 4:3 (3536 x 2656) at 23.98p, 25p, 29.97p, 50p

Note: WB and ISO controls/slider adjustments are available for this camera in Final Cut Pro.
Note: To enable the Panasonic S5II's RAW data output over HDMI, purchasing the Software Upgrade Key DWW-SFU2 is required.

Panasonic S5IIX RAW Support

ProRes RAW Recording Specification via HDMI

• 5.9K – 16:9 (5888 x 3312) at 23.98p, 25p, 29.97p
• 4.1K – 17:9 (4128 x 2176) at 23.98p, 25p, 29.97p, 50p, 59.94p
• 3.5K – 4:3 (3536 x 2656) at 23.98p, 25p, 29.97p, 50p

Note: WB and ISO controls/slider adjustments are available for this camera in Final Cut Pro.

Fujifilm X-S20 RAW Support

ProRes RAW Recording Specification via HDMI

• 6.2K – 3:2 (6240 x 4160) at 23.98p, 24p, 25p, 29.97p
• 5.2K – 16:9 (5232 x 2944) at 23.98p, 24p, 25p, 29.97p, 50p, 59.94p

Note: WB and ISO controls/slider adjustments are available for this camera in Final Cut Pro.

Support of additional Anamorphic De-Squeeze modes

• 1.6x, 1.65x and 1.79x.

AirGlu2 Improvements:

• Ability to pair the SHOGUN CONNECT to a maximum of two AirGlu BT Bluetooth-enabled devices. Previously, only one pairing slot was available.
• Improved AirGlu BT Bluetooth pairing speed with 3rd party hardware.
• Improved AirGlu RF reliability when using the Japanese RF channel group.

Known Limitations to be resolved in future releases:

• It may take up to 10 seconds for Wi-Fi and Ethernet connections to re-established when users switch between record and playback mode. Please allow the system time to automatically reconnect to your network.
• When playing back an H.265 clip that was recorded at 720p50 & 720p59.94, the Zoom and Waveform monitoring functions are disabled.
• When recording ProRes RAW from the X-H2, there is a 36px thick black line on the right edge of the frame.
• WFM monitor tool is not available for 8kp30 and 6Kp60 RAW inputs.
• Network Record Control is not available when H.265 is selected as the record format.
• Live Streaming is only available when using standard YCC 422 video inputs, and when the record codec is set to either ProRes or DNx. If ProRes RAW or H.265 are selected as the record codec, streaming isn't available.
• If the user boots into ProRes RAW recording mode with a YCC SDI Input, the monitoring image may be incorrect. Monitoring and Recording whilst outputting a RAW signal to the SHOGUN CONNECT in ProRes RAW mode will work as expected.
• If switching between different camera models whilst HDMI Compatibility mode is selected, ensure that you reboot the SHOGUN CONNECT before connecting a new camera.
• In playback mode, selecting the first ProRes RAW file to view, some artifacts may be visible. These are not present in the recorded file and will not appear on any clips played after the first selected clip.
• Sluggish performance when using two AtomRemote apps connected to a single Shogun CONNECT. Please only pair one AtomRemote app per device.